Installation Instructions

Hardware Installation Guide Installing the IDR
02030311-07 Airspan Networks Inc. 12-19
 Connector pinouts:
IDR side
PC side
Straight-through cable
Crossover cable
6-pin RJ-11
9-pin D-type
female
9-pin D-type
male
9-pin D-type
female
Pin Function
Pin Pin Pin
1 Rx 2 2 3
5 GND 5 5 5
6 Tx 3 3 2
To connect the IDR to the WipLL management station (PC):
1. Connect the 6 pin RJ-11 connector, at one end of the straight-through cable, to
the IDR’s RJ-11 port labeled Serial.
2. Connect the RJ-11 connector, at the other end of the straight-through cable, to
the RJ-11-to-9 pin D-type adapter.
3. Connect the 9 pin D-type male connector, at one end of the crossover cable, to
the RJ-11-to-9 pin D-type adapter.
4. Connect the 9 pin D-type female connector, at the other end of the crossover
cable, to the PC’s serial port.