Installation Instructions

Installing the IDR Hardware Installation Guide
12-14 Airspan Networks Inc. 02030311-07
1 Rx+
2 Rx-
3 Tx+
6 Tx-
Note: pins not mentioned in the table are not connected.
To connect IDR to the subscriber’s Ethernet network:
1. Attach the 8-pin RJ-45 connector, at one end of the cable, to the IDR's Ethernet
port, labeled Ethernet (see Figure 12-11).
2. Attach the 8-pin RJ-45 connector, at the other end of the cable, to the PC's LAN
port (see Figure 12-11).