User's Manual Part 2b

Hardware Installation Guide Installing the GPS

02030311-05 Airspan Networks Ltd. 6-3

6.2. Connecting to the BSDU

The GPS antenna is connected to the BSDU’s 15-Pin D-type port, labeled GPS (see

Figure 6-2).

Figure 6-2: BSDU rear panel showing GPS port

Note: Airspan supplies un-terminated cables for connecting the GPS to the

BSDU. Refer to Appendix B, “Cable Crimping" for cable crimping procedures

for these connectors.

Warning: To avoid electrical or fire hazard, ensure that the connection to the

GPS is made prior to connecting the BSDU to the power supply.

The following describes the cables and connectors:

! Connector:

! GPS: 12-pin female (Deutsch MMP26C-2212S1)

! BSDU: 15-Pin D-type male

! Cable: Multipair Overall Shielded (22 AWG)

15-Pin D-type

ort for GPS