User's Manual Part 2b

Installing the BSDU Hardware Installation Guide
5-24 Airspan Networks Ltd. 02030311-05
3. Connect the other end of the power cable to the power source (i.e., to the
customer’s power supply or to the WipLL BSPS). Ensure that the black-colored
(i.e., negative) side of the connector is inserted in the upper part of the power
receptacle; and the red-colored (i.e., positive) side of the connector is inserted in
the lower part of the power receptacle (see Figure 5-13).
Figure 5-13: BSDU-to-BSPS power cable connections