User's Manual Part 2b

Installing the BSDU Hardware Installation Guide
5-22 Airspan Networks Ltd. 02030311-05
5.12.1. Grounding the BSDU
Before connecting the power supply to the BSDU, you need to ground (earth) the
BSDU.
To ground the BSDU:
1. Connect one end of the grounding lug wire (green/yellow) to the grounding lug
screw located on the rear panel of the BSDU chassis (see Figure 5-11).
2. Connect the other end of the grounding wire to the cabinet rack or any other
customer grounded point at the base station.
Figure 5-11: BSDU grounding connection (BSDU rear panel)