Install Guide Part 1

Introduction Hardware Installation Guide
1-12 Airspan Networks Ltd. 02030311-05
1.3.3. Network Operations Center
Airspan’s WipLL system provides state-of-the-art, use-friendly management tools
for managing the WipLL system. These management tools provide fault,
configuration, performance, and security management of the WipLL system.
The WipLL system provides the following management tools:
! WipManage™:
WipManage is the WipLL network (element) management system (NMS)
providing fault, configuration, performance, and security management.
WipManage is a Windows-based, stand-alone WipLL application that provides a
user-friendly and intuitive Graphic User Interface (GUI).
WipManage provides local and remote network management that is based on
Simple Network Management Protocol (SNMP). WipManage provides
configuration, fault and alarms, security, and bandwidth management to all the
WipLL units—WipLL base station equipment and WipLL CPE.
! WipConfig™:
WipConfig is an easy-to-use, Windows-based application that provides local
initial configuration for WipLL devices during installation. This initial
configuration includes, for example, assigning the units IP addresses and
positioning the antenna (or transceiver) for optimal reception.
! WipConfig PDA™:
WipConfigPDA is designed to run on personal digital assistants (PDA), and
provides an alternative tool to WipConfig (described above) for providing initial
configuration.
! WipAD™:
WipAD is a Windows-based application that provides quick-and-easy automatic
downloading of software versions to multiple WipLL devices.