User's Manual Part 1
Table Of Contents
- Hardware Installation Guide
- Contents
- About this Guide
- 1. Introduction
- 2. Safety Guidelines
Introduction Hardware Installation Guide
1-8 Airspan Networks Ltd. 02030311-05
1.3.2. Subscriber Site
The WipLL subscriber site is located at the service provider's subscribers’ premises.
The WipLL subscriber site equipment consists of a radio transceiver that receives
and transmits signals from and to the base station. The WipLL radio transceiver
provides the subscriber with high-speed data access, Internet access, and VoIP at up
to 4 Mbps. The WipLL transceiver connects to the subscriber’s network or PC via
WipLL’s Ethernet hub (i.e., Subscriber Data Adapter).
The WipLL system can group subscribers into VLANs, as well as assign MIR and
CIR levels to each subscriber, guaranteeing bandwidth to subscribers.
The WipLL system provides two different CPE installation configurations:
! Indoor unit (IDU) and outdoor unit (ODU): this setup is composed of
WipLL’s SDA and SPR devices, representing the IDU and ODU, respectively.
! Indoor unit (IDU) only: this setup is composed of the Indoor Data Radio (IDR)