User's Manual

Hardware Installation Manual Installing the BSDU
02030311-03 Airspan Networks Ltd. 5-15
! Connector pinouts:
RJ-45 (10Base-T)
RJ-45 (100Base-T)
Pin Signal Pin Function
1 +RX 1 +TX
2 -RX 2 -TX
3 +TX 3 +RX
4
N
C 4
N
C
5
N
C 5
N
C
6 -TX 6 -RX
7
N
C 7
N
C
8
N
C 8
N
C
To connect the PC to the BSDU using a network connection:
1. Connect the RJ-45 connector to the PC’s Ethernet port.
2. Connector the RJ-45 connector, at the other end of cable, to the BSDU’s
10Base-T port labeled 2 (see Figure 5-8);
-Or-
Connect the BSDU’s two 10Base-T ports with the supplied crossover cable, and
then connect the RJ-45 connector to the BSDU’s 1000Base-T port
(see Figure 5-9).