User's Manual

Installing the BSDU Hardware Installation Manual
5-10 Airspan Networks Ltd. 02030311-03
! Synch OUT
Pin Name Description
1 TD+ Transmit data to GPS
2 TD-
Transmit data from
GPS
3 TX+
Transmit Data (hop
synchronization)
4 RD+
Receive Data (from
GPS)
5 RD- Receive Data (to GPS)
6 TX-
Transmit Data (hop
synchronization)
7 1PPS+ GPS pulse per second
8 1PPS- GPS pulse per second
5.3.5. Connecting the Power Management port
The BSDU’s front panel provides a 9-Pin DB-type port for serial RS-232 power
management of the BSPS. WipLL’s WipManage manages BSPS by connecting to
the BSDU through the IP network (i.e., from the BSR), and then manages BSPS
through the serial connection between the BSDU and BSPS. The reason for the
serial connection is that the BSPS does not support SNMP-based management,
which is the bases of WipManage.
Connector: depending on the BSPS model:
! 9-Pin DB-type male (BSDU and BSPS)
! 9-Pin DB-type male (BSDU) to 8-Pin RJ-45 (BSPS) (see Figure 5-6)