User's Manual

Installing the BSR Hardware Installation Manual
4-4 Airspan Networks Ltd. 02030311-03
The BSR’s physical dimensions are described in Table 4-1
Table 4-1: BSR Physical Dimensions
Parameter Value
Height 400 mm (15.74 inches)
Width 317 mm (12.48 inches)
Depth 65.5 mm (2.58 inches)
Weight 4.7 kg
Note: The BSR’s physical dimensions exclude the mounting kit.
4.3. Cable Installation Guidelines
This section defines the procedures to be adhered to when installing data cables at
the base station.
Warning: Pre-terminated cables should be fitted with protective poly bags
during cable installation processes.
Metal cable trays shall be earthed to a central earth point within the customers’
equipment room.
Note: A minimum separation of 200 mm should exist between power and data
cables.
The following points are to be considered:
! When installing network cables, ensure that they are not damaged by friction or
sharp edges. Spacing of installation personnel at regular distances during any
cable drawing-in process will avoid contact with potential hazards.
! Data cables providing connection to the customers network shall be run in
suitable conduit or trunking. Cable trunking should be secured to the wall in
accordance with manufacturers instructions.