User's Manual

Installing and Configuring the IDR Hardware Installation Manual
10-14 Airspan Networks Ltd. 02030311-03
10.3. Connecting Power Supply
The IDR is powered by an external power supply (Triple Output External Adapter).
The IDR connects to the power supply via the power port located on the IDR’s front
panel.
The following table lists the external power supply specifications:
Power parameter Units
Voltages 110-240 VAC
Frequency 50 to 60Hz
Maximum power
consumption
Less than 15W
Warning: Ensure that plugs fitted to mains power leads for subscriber
premises equipment are compatible with AC mains sockets. Do not replace
plugs on power leads to suit local requirements without first verifying earthing
practice for the country and equipment in question.
Careful consideration must be given to issues including local wiring
requirements, cable color-coding, and safety earthing and circuit protection
requirements.
Warning: To avoid electrical or fire hazard, ensure that the data connections
to the IDR are made prior to connecting the power supply.
The AC mains must be capable of supplying at least 230 VAC
Prior to connecting to the power outlet, the following pre-connection inspection
should be performed on power sockets:
! Power socket shall be visually inspected to ensure that no other equipment is
connected to the power outlet.
! There is no physical sign of damage to the power outlet.