User's Manual

Hardware Installation Manual Installing the SPR
02030311-03 Airspan Networks Ltd. 8-7
8.4. Mounting the SPR
The SPR can be mounted on a wall or pole (see Figure 8-9). The SPR is mounted
using the mounting holes located on the SPR’s bottom panel, and the mounting
bracket (provided). The mounting brackets for wall- and pole-mounting are different
from one another.
The following is a list of physical parameters that should be considered before
mounting SPRs:
8.4.1. Minimum Distance between SPRs
A minimum of 3-meter separation is required between mounted SPRs and existing
customer radio equipment when not transmitting on the same sector (see Figure 8-4).
3.0 metres
Figure 8-4: SPR separation when not transmitting on the same sector
A 1-meter separation is required between SPRs when on the same sector and
transmitting to the same BSR without requiring shielding (see Figure 8-5).
1.0 metre
Figure 8-5: SPR separation when transmitting on the same sector to the same BSR