Manualshelf

User's Manual

ManualsBrandsAirspan Networks ManualsElectronicsBase Station Radio
101102103104105106107108109110
Installing the BSPS Hardware Installation Manual
7-12 Airspan Networks Ltd. 02030311-03
11. Connect the temperature sensors to the appropriate connector at the rear panel of
the main unit. Place the sensors in the battery compartment.
12. Switch on the
LOAD and BATTERY circuit breakers. Verify that the BYPASS
breakers are off.
The system is now ready for use.
13. Verify that the
FAULT red LED is not lit and the buzzer not active.
14. Connect a PC to the RJ-45 port at the front panel of the main unit to control the
system (optional).
Figure 7-6: BSPS Main Rack front view