User Manual

Hardware Installation Guide Installing the SPR
The Y-cable connector pin assignments are displayed schematically in Figure 10-18.
Figure 10-18: Y-cable connector pin assignment
To connect the SPR to a PC for serial configuration (see Figure 10-19):
1.
2.
3.
Connect the 15-pin D-type male connector, at the one end of the Y-cable, to the
SPR.
Connect the 15-pin D-type male connector, at the other end of the Y-cable, to
the SDA.
Connect the 9-pin D-type female (RS232) connector, at the other end of the Y-
cable, to the PC’s serial port.
02030311-07 Airspan Networks Inc. 10-27