Installation Guide

Hardware Installation Guide Basic Design of Devices
02030311-08 Airspan Networks Inc. 6-3
Width 317 mm (12.48 inches)
Depth 65.5 mm (2.58 inches)
Weight 4.7 kg
exclude the mounting kit
6.1.3. Ports
The BSR provides various ports on its front panel, as displayed below:
Figure 6-1: BSR front panel (built-in antenna model)
Note: BSR models that use third-party external antennas provide an N-type
female receptacle for attaching an external antenna. In addition, BSR models
operating in the 700 and 900 MHz bands provide two N-type receptacles fo
r
dual antenna receive diversity.
The table below describes the BSR ports.
Table 6-3: BSR ports
Port Interface
15-pin D-type
• Ethernet (10BaseT): with the BSDU (or SDA)
• Synchronization: of BSRs controlled by BSDU
• Power: supplied by BSDU (or SDA)
9-pin D-type
Serial (RS-232) local initial configuration (using WipConfig tool) during
installation
N-type
(Depends on model). For attaching third-party external antennas. BSR models
for the 700 and 900 MHz bands provide two N-type ports. BSR models with
9-pin D-type por
t
15-pin D-type port