Installation Guide

02030311-08 Airspan Networks Inc. 6-1
Basic Design of Devices
This chapter describes the basic design of the ASWipLL devices that can be
installed at the Base Station:
BSR
BSDU
SDA-1/48V
GPS
BSPS
6.1. BSR
The BSR is an encased outdoor radio providing access to the BSR's communication
ports on its front panel. The BSR's bottom panel provides holes for mounting the
BSR to, for example, a pole or wall.
6.1.1. Models
The BSR is available in the following basic physical designs:
BSR with a built-in, internal antenna
BSR with an N-type port for connecting an optional third-party external antenna
BSR with two N-type ports for connecting two optional third-party external
antennas for dual antenna diversity (when operating in the 700 or 900 MHz
bands)
6