User's Manual

Connecting Third-Party External Antennas Hardware Installation Guide
16-2 Airspan Networks Inc. 02030311-07
To connect the SPR to a third-party external antenna:
Connect an N-type male connector of the third-party antenna to the N-type port
located on the SPR’s front panel, as displayed in Figure 16-1.
Figure 16-1: SPR model with N-type connector for attaching an external antenna
Notes:
1) For crimping RF coaxial cables to N-type connectors, see Appendix C,
“Cable Crimping".
2) For a description of third-party antennas offered by Airspan for SPRs
operating in the 700 MHz band, see Appendix G, "Third-Party Antenna
Specifications.