User's Manual

Hardware Installation Guide Serial Cabling
02030311-07 Airspan Networks Inc. 15-3
The Y-cable connector pin assignments are displayed schematically in Figure 15-2.
Figure 15-2: Y-cable connector pin assignment
To connect the SPR to a PC for serial configuration (see Figure 15-3):
1. Connect the 15-pin D-type male connector, at the one end of the Y-cable, to the
SPR.
2. Connect the 15-pin D-type male connector, at the other end of the Y-cable, to
the SDA.
3. Connect the 9-pin D-type female (RS232) connector, at the other end of the Y-
cable, to the PC’s serial port.