User's Manual

02030311-07 Airspan Networks Inc. 15-1

Serial Cabling

Serial CablingSerial Cabling

Serial Cabling

The SPR’s 15-pin D-type port provides serial interface with a PC for configuring the

SPR through an RS-232 communication mode. The 15-pin D-type port uses three

pins for serial interface with the PC, and six pins for interfacing with the SDA (with

which the SPR is connected). A Y-cable (splitter) is used to connect the SPR's 15-

pin D-type port to both the PC and the SDA.

Note: For performing SPR initial configuration, refer to the ASWipLL

WipConfig User’s Guide.

The SPR-to-PC and SDA cable connections for SPR serial configuration are as

follows:

! Connectors:

! SPR side: 15-pin D-type male (only 6 pins used)

! PC side: 9-pin D-type (RS-232)

! SDA side: 15-pin D-type male

! Cable: straight-through Y-cable