User's Manual

Hardware Installation Guide Connecting Third-Party External Antennas
02030311-07 Airspan Networks Inc. 10-3
To connect the BSR to a third-party external antenna:
 Connect the third-party N-type male connector, at the end of the RF cable, to the
N-type port located on the BSR’s front panel, as displayed in Figure 10-1.
Figure 10-1: Attaching third-party external antenna
Notes:
1) For crimping RF coaxial cables to N-type connectors, see Appendix C,
“Cable Crimping”.
2) Ensure that the third-party antenna cable is of sufficient quality to reduce or
eliminate loss when operating in the required frequency band.
3) For a description of third-party antennas offered by Airspan for BSRs
operating in the 700 MHz and 900 MHz bands, see Appendix G, "Third-Party
Antenna Specifications".