User's Manual

Mounting the Devices Hardware Installation Guide

7-4 Airspan Networks Inc. 02030311-07

b. Slide an M10 flat washer and M10 spring lock washer onto an M10 hex head

screw (ensure spring lock washer is closest to the bolt's head). From the

external side, insert the M10 hex head screw through the mounting bracket

and BSR's mounting holes. Fasten the M10 hex head screw (one is provided

with a built-in nut while the other requires you to insert an M10-hex nut into

the BSR's mounting hole).

Figure 7-4: Mounting bracket connected to BSR

2. Attach the clamping bracket to the mounting bracket:

a. Slide an M6 spring lock washer onto an M6 hex head screw. Align the

mounting bracket's and clamping bracket's pivot holes, such that the

clamping bracket is aligned to the the inside of the mounting bracket. From

the external side of the mounting bracket, insert the M6 hex head screw into

the pivot holes and then fasten, but not tightly. (The clamping bracket

provides a built-in nut.)

BSR's mounting

hole with built-in

nut holder

Mounting bracket

with built-in nut

Mounting

racket