User's Manual

AirHarmony-1000 Installation Guide
UGD-D01006 Airspan Commercial and Internal Use 42
5. Secure the prepared ends of the power cable into the head part of the connector
(male part with visible pins).
Figure 41: Secure cable to connector
6. Insert and secure the brown wire into position 1 and the blue wire into position 2 and green
wire into position (earth ground).
Figure 42: Power cable wires assembled
Note: Individual connection numbers are marked on each part of the connector.
Note: Set screw maximum recommended tightening torque of 0,3 Nm.
Figure 43: Numbered connector contacts
7. Assemble the parts of the connector and tighten the gland to provide a waterproof seal.