User's Manual

AirHarmony-1000 Installation Guide
UGD-D01006 Airspan Commercial and Internal Use 30
Figure 16: Back-2-Back Assembly
The difference in height between the installed units after installation will be 40mm.
Note: The Universal Mounting plate for each AirHarmony-1000 must be mounted on the pole prior
to assembling the AirHarmony-1000 units.
Assemble each unit’s AC/DC Converter as explained in AC/DC Converter Pole Mount Assembly with
the same deviation of the clamp bands.
5.2 Wall Mount Assembly
The following images show the wall mount assembly.
1. Position mounting plate against the wall with slots facing up. Be sure to position the wall
mounting plate straight with level mounting to ensure the unit sits evenly.