User's Manual
AirHarmony-1000 Installation Guide
UGD-D01006 Airspan Commercial and Internal Use 29
Figure 15: Mounted on pole
5.1.1 Installing AirHarmony-1000 Back-to-Back
In the event you want to deploy two (2) AirHarmony-1000(s) on the same pole – back-to-back, then
the installation must be performed so that the clamp bands used to secure the units to the pole do not
interfere with the clamp bands of the other unit. Each unit is installed separately as explained above in
Installing AirHarmony-1000. The clamp bands are installed with a small deviation to each other as
displayed below: