Installation Guide

AirHarmony-4200 DC (Internal Filters) Installation Guide
UGD-D01196 Airspan Commercial and Internal Use 32
4.3 Securing AirHarmony-4200 DC to the Mounting Plate
Caution: Proper local rigging and hoisting practices should be followed when installing
the AirHarmony-4200 DC on pole or wall.
To mount AirHarmony-4200 DC to the mounting plate, perform the following:
1. Lift up the AirHarmony-4200 DC unit and hook the slotted holes onto the mounting pins
(studs) on the top of the mounting plate.
Figure 13: Lift unit and fit the slotted holes unto studs on top of mounting plate
The following displays a close up of the Pin (stud) alignment.
Figure 14: Align Pins