Installation Guide

AirHarmony-4200 DC (Internal Filters) Installation Guide
UGD-D01196 Airspan Commercial and Internal Use 20
2.2 AirHarmony-4200 DC Internal Filters Installation
Checklist
Plan the installation of the AirHarmony-4200 DC by using the Installation Checklist, which you can
find as a removable job aid in Appendix A for this guide.
3 Verifying Prerequisites
Prior to installing the AirHarmony-4200 DC Internal Filter unit, verify the required safety, power,
tools, parts and components. This chapter includes the hardware, software, and client requirements
for installation.
Important: Set up requirements for the installation is detailed in the Job Sheet, see Appendix_A.
3.1 Verifying Site Requirements
To set up the AirHarmony-4200 DC Internal Filter unit, an
IP connection to a Netspan server is required.
3.2 Verify Installation Requirements
Verify the Tools
Table 7. Minimum Hardware Requirements
Tool
Use
#13 wrench
for securing the M8 Hex Head bolts on the
Pole/wall mount
1/2” Socket Wrench
For 5/16” Hex head (Lag) bolts when wall mounting