Installation Guide

AirHarmony-4200 DC (Internal Filters) Installation Guide

UGD-D01196 Airspan Commercial and Internal Use 16

1 Introduction

This section provides a descriptive overview of the Airspan’s AirHarmony-4200 DC Internal Filters a

Macro-class eNodeB variant and its place in the Airspan product suite.

This document is intended for readers with LTE working knowledge.

All information in this document is for general information only, and is subject for change without

notice.

1.1 AirHarmony-4200 DC Internal Filters

AirHarmony-4200 DC Internal Filters is part of Airspan’s carrier-class LTE Advanced small cell eNodeB

family. AirHarmony-4200 DC Internal Filters is a Mini-Macro class product that supports 3GPP’s Long

Term Evolution (LTE) eNodeB specifications, providing high-speed data, mobility, Voice over LTE, and

broadcast/multicast services in order to meet the demands of the LTE Mobile Carriers.

AirHarmony-4200 DC Internal Filters is a compact, easy to install Mini-Macro class eNodeB, allowing

an operator to deploy LTE broadband services using existing infrastructure or Street Furniture (e.g.

street lamps, power poles, building rooftop or sides etc…)

AirHarmony-4200 DC Internal Filters employs Software Defined Radio (SDR) technology, together

with two transmit and receive paths for each sector and a GPS antenna and receiver – all in a highly

integrated, physically small and light, All-Outdoor package, targeted to blend seamlessly into the

urban environment. This compact outdoor product minimizes physical footprint, power

consumption and operator OPEX.

AirHarmony 4200 implements 4 RF channels which can be operated as a dual sector / dual carrier

2x2 MIMO or as a single sector, single carrier 4x4 MIMO.

AirHarmony 4200 fully supports the standard LTE (Uu/S1/X2) interfaces.

All Airspan eNodeB products, including AirHarmony-4200 DC Internal Filters, are interoperable with

a rich portfolio of 3

party end user devices, including many handsets, indoor UEs, outdoor UEs and

USB dongles from several ODMs, using various chipsets. For an updated of interoperability list,

please contact your nearest Airspan Sales Representative.

Additionally, AirHarmony-4200 DC Internal Filters units can be tightly integrated with Airspan’s

iBridge and iRelay transport solutions. AirHarmony-4200 DC Internal Filters units supports an

integrated PoE interface which powers and connects either iBridge, iRelay, or a third party Wi-Fi

Access Point. This configuration creates a single installation that fully supports end to end IPv6 plug

and play deployment by just adding power. For more details please refer to the iBridge and iRelay

product specifications.

Note: For management please refer to the Airspan LTE Commissioning Manual as well as Netspan

manuals.

Note: The AirHarmony 4200 DC Internal Filters requires operation using an Airspan FCC-specific

version of Netspan acting as a CBRS Domain Proxy.