User Manual

AS4000 Survey Tool

605-0000-429

Issue 1.6. Date 1/9/99

Appendix C

Page 1 of 1

ANGLE TEMPLATE

The angle template is designed to assist in measuring the panning angle of the CRU

Instructions for Use

1. Photocopy the template onto a transparent media. It may also assist to mount the template on

clear Perspex.

2. Stand underneath the CRU facing the house wall

3. Raise the template above the head and orientate the template such that the parallel lines align

with the wall and the CRU Falls within the circle. The face of the CRU should dissect the

small circle in the centre. If a rod is being used on the CRU mounting bracket then the back

of the CRU should dissect the small circle in the centre.

85 85 60 456045

Align these lines parrallel with wall

CRU should be sighted to appear centrally in the circle.

The angle should be measured using the sighting pole position on the scale.

CRU

4. The diagram above shows a typical view as observed through the template and that the angle

of orientation is 35°. The diagram below shows a pan that does not meet the criteria for

deployment The angle is within the shaded band indicate that the wall would form an

obstruction to a clear radio path. A different location should be sought.