User Manual

AS4000 Survey Tool

605-0000-429

Preface

Issue 1.6. Date 1/9/99

Page 5 of 8

Safety Instructions - Warnings and Cautions

SAFETY

1. Read and follow all warning notices and instructions marked on the product or included in

this manual

2. Hard hats should be worn at all times whilst using the survey tool.

3. Do not use survey tool under power cables.

4. Use manual Handling techniques and procedures when lifting and moving equipment.

5. Do not use the survey tool in high winds

6. Beware of overhanging eaves when raising the survey tool

7. When installed in the final configuration, the product must comply with the applicable Safety

Standards and regulatory requirements of the country in which it is installed. If necessary,

consult with the appropriate regulatory agencies and inspection authorities to ensure compliance.

NOTE

Airspan products do not contain hazardous substances (as defined in UK ‘Control of Substances

Hazardous to Health Regulations 1989’, and the ‘Dangerous Substances Regulations 1990’). At

the end of any Airspan product’s life cycle, the customer should consult with ACC to ensure that

the product is disposed of in conformance with the relevant regulatory requirements