User Manual

AS4000 Survey Tool
605-0000-429
Issue 1.6. Date 1/9/99
DLP-002
Page 1 of 2
TEST BOX SET UP PROCEDURE
The test box is designed with a splash proof cover but is not designed to be waterproof. In rainy
conditions it should be afforded improved weather protection.
1. The test box contains two rechargeable batteries sufficient for approximately 3 hours use.
Power (24V DC) may also be supplied through the battery charge sockets at the side of the
unit.
SURVEY TOOL
CONTROL UNIT
Transmitte
r Enabled
Transmit
Enable
Transmit
Disable
WARNING:When illuminated
Subscriber terminal transmitter
CANNOT be disabled.
ProgramReset
Reset
Indicator
Transmit Signal Strength (PC) / Battery TestReceive Signal Strength (AGC)
Battery
Test
Link
Aquired
Power
On/Off
STMON
Drop Cable
Connector
Battery
Charge
Telephone
Figure 11. Survey Test Box
2. Ensure that the Power is switched off and the TX switch is set to TX Disabled.
3. Once the mast has been elevated to the required height additional cable maybe payed off the
spool if a location to one side is more appropriate for the test box. The maximum cable
length is 25metres.
4. Typically the test box is operated lying flat between two of the tripod legs so that it can be
easily seen when panning the CRU.
5. Connect the drop cable to the socket at the side of the test box ensuring that the plug is
oriented correctly in the socket.