User Manual

AS4000 Survey Tool
605-0000-429
DLP-001
Issue 1.6. Date 1/9/99
Page 4 of 8
3. Attach the free end of a measuring tape using the clip attached to the CRU mounting to the
bracket.
4. Place the pole in the top section of the mast and tighten the pole using the quick clamp.
5. Place the pin at the base of the mast into the bush on the base. Secure the mast to the base
using the mast mounting screw as shown in Figure 8.
Mast
Mast Mounting Screw
Tripod Base
Figure 8. Securing The Mast To The Base.
6. Secure the drop cable and measuring tape with Velcro ties to the CRU mounting bracket.
See Figure 9.
7. Attach the guy ropes to the guy collar if:
a) it is anticipated that the mast is to be left in situ for some time
b) ground stability is suspect
c) there are high winds