User Manual

AS4000 Survey Tool
605-0000-429
TAD-004
Issue 1.6. Date 1/9/99
Page 2 of 2
1.3 AS4000 FA Data Shelves
CT Modem Card:
To operate the Survey Tool on a data shelf a change of one modem card per FA
modem shelf is required from part no. 303-0039-900 to part no. 303-0039-903.
Airspan recommend that RW15 is always used for surveying and that modem card 8 is
replaced.
Shelf Controller Card:
To accompany the change of Modem Card the Shelf Controller Firmware should be
checked and upgraded if necessary to bring the Shelf Controller to 303-004-903 Rev D.
Firmware for testing. Flash U21 696-3000-272D
U19 696-3000-273D
U15 696-3000-272D
U12 696-3000-273D
H8 U20 696-3000-072F
Replacing Modem 8 also enables the FA Level Control Unit to function on this shelf
(actually operating on RW16). To prevent false automatic switch over to RW16 the
modem sparing function should be disabled via the Shelf Controller LAT port at the
time of installation.
Notes:
1) The Survey Tool should function correctly with either a 303-0041-905 TU card
or a 303-0004-915 TU card in the Data Modem Shelf.