User Manual

AS4000 Subscriber Terminal
Installation and Commissioning DLP 013
605-0000-436
Issue 1.5 Date: 18th October 1999
Page 7 of 14
Uplink Panel
Link Status of Uplink, either No link or link OK.
PC &
TX Power
If the CRU has been factory calibrated, the actual TX power will
be given in dBm (range 0dBm to 25dBm), and the PC control
Voltage is in the range 0.00 to 5.00 V (where 0.00V = maximum
power). For un-calibrated CRUs the TX Power displays ‘Uncal’
and the control voltage is in the range 0.00 to 3.00V(where 3.00V
= maximum power).
Table 17. Uplink Panel