User Manual

AS4000 Subscriber Terminal
Installation and Commissioning DLP 006
605-0000-436
Issue 1.5 Date: 18th October 1999
Page 1 of 4 1988 Airspan Communications Corporation
INSTALLING THE TYPE-4A PSU.
The Type 4A PSU consists of an PSU Unit with cable termination facilities and
is designed to be used in applications where battery backup is not needed.
STEP PROCEDURE
PSU (Type 4A) Positioning and Securing
1. Confirm the position of the Type-4 PSU, allow for adequate ventilation and service
access.
155mm
Fixing Centres
127mm
Fixing Centres
Screw No 8
x 50mm
Wall Plug
FUB x 50mm
Cup
Washer
150mm
200mm
60mm
65mm
70mm
Figure 15. PSU Positioning and Securing