User Manual

AS4000 Subscriber Terminal
Installation and Commissioning DLP 001
605-0000-436
Issue 1.5 Date: 18th October 1999
Page 3 of 2
11. Screw the CRU and bracket assembly to the wall bracket choosing to hinge from left or
right to allow panning in the directions of the CT antenna.
12. Rotate the CRU to face in the general direction of the CT. At this stage, finger tighten
the bracket locking hex headed screws (Part No 175-0010-002) only.
13. Check that the CRU is stable and secure in both planes.
STOP. THIS PROCEDURE HAS BEEN COMPLETED.