User Manual

AS4000 Subscriber Terminal
Installation and Commissioning GSI 004
605-0000-436
Issue 1.5 Date: 18th October 1999
Page 2 of 2
2. Required Equipment
2.01 The table below shows the required equipment.
Table 4. Required Equipment.
ITEM DESCRIPTION MODEL
01 Digital Multimeter Fluke 77 or similar
02 Test Telephone *Note 1
03 Compass
04 CRU Generic Test Cable
(connectorised CRU only) 2
adapters are provided per CT rack
installation.
ACC 454-0000-182
05 PC with STMON *Note 1
2.02 Note 1: STMON software is needed to programme the CRU. A test telephone can
be used to programme the ST-V2 if STMON is not available. The system needs to
be connected to a network switch to fully commission the ST-V2 with a test
telephone.
The ST I1 needs to be commissioned with a ISDN phone.
2.03 Installers may not be familiar with the local environment and topographical
conditions, it is necessary to provide each installer with a map of the local area. A
compass for use when determining the exact bearing of the CT location is also
necessary.