User's Manual

605-0000-595 Subscriber Terminal Installation and Commissioning
128
1. Connect the network card in the PC or the line connection from the hub to the RJ45
port on the SIU
2. Configure the hub or network card to the manufacturers instructions.
3. The RJ45 interface as used for 10baseT connection
Connecting the Telephone (s) to the SIU
1. The RJ11 interface as used for the telephone.
RJ11 Telephone / HomePNA Port
System Management Interface
Front Panel LEDs
Type 41
LED Colour Off On Flashing
Power: Green No input Indicates power OK Switched to Battery
(only for units with
integrated battery or
for power supply with
D-Type connector)
AUX 1 Not defined at present. Illuminates when activity present on the LAT
Link: Red Link is active ST not configured.
Green Data is being sent Col/Act:
Red Collision
Netlink: Green Indicates a valid link is
present
SPD: Green Connected to Connected to Ethernet