User's Manual

605-0000-595 Subscriber Terminal Installation and Commissioning
126
Installing AS4020 SIUs
Installing P Series SIUs
The P series Service Interface Unit (SIU) is used for packet data and voice can be used as a
free standing desk unit, wall mounted or used in the module enclosure to the customers’
preference. For details on installing the P series into a module enclosure see 'Installing the M
Series.'
The P Series Service Interface Unit (P1V4shown)
Installing the P Series Service Interface Unit
STEP PROCEDURE
1. Confirm the position of the SIU (allow for adequate ventilation, service access and
PSU location).
2. Install the SIU within 1 metre of an AC power point and 50 metres (if using RG6) of
the outdoor unit. (75 metres if using RG11 drop cable).
Wall Mounting the Service Interface Unit
1. The wall mounted unit fits onto the SIU wall mounting bracket.
2. Offer the wall mounting bracket up into position and mark the three fixing positions
onto the wall. The wall mounting bracket should be fitted with the location lugs
pointing upward.