User's Manual

605-0000-595 Subscriber Terminal Installation and Commissioning
58
5. For poles 32-38mm secure the antenna radium to the mounting pole using the clamp
bracket secured by two M6*50mm Pozidrive screws, 6mm flat, and 6mm coiled
washers as shown below. Tighten the set screws to a torque of 1.75Nm.
For poles 38-45mm secure the antenna radium to the mounting pole using the clamp
bracket secured by two M6*60mm Pozidrive screws, 6mm flat, and 6mm coiled
washers as shown below. Tighten the set screws to a torque of 1.75Nm.
Vertical Polarisation
The V marked on the outdoor unit should be pointed up. The V is marked on both
sides of the outdoor unit to facilitate for left or right cable entry.
Horizontal Polarisation
The H marked on the outdoor unit should be pointed up. The V is marked on both
sides of the outdoor unit to facilitate for top or bottom entry
.