User's Manual

Installation

Antenna Wall Bracket Positioning and Securing

Securing Antenna Wall Bracket to a Wooden Structure

1. Remove mini pole from bracket by unscrewing and removing the locating bolt and

pulling the pole clear of the bracket. The pole snaps onto the bracket and some force is

required to remove it.

2. Using the wall bracket as a template, mark the first hole position.

3. Drill a first hole pilot, 5mm diameter to a depth of 15mm (use a drilling depth gauge),

place the mounting bracket on the wall with the arrow embossed on the back plate

pointing up. Screw the M8 coach bolt provided through the mounting bracket and

screw into the hole. Tighten sufficiently to secure the bracket to the wall.

4. Using a spirit level, adjust the position of the wall bracket and mark the remaining 3

holes.

5. Drill the remaining pilot holes, 5mm diameter to a depth of 15mm, then fit the hex

head M8 coach bolts provided through the mounting bracket into the holes.

6. Tighten all the bolts sufficient to ensure a firm fixing to the wall.