User's Manual

Installation
47
2. When multiple STs are deployed at the same site the recommended minimum
spacing between each outdoor unit is 1 metre.
3. The Outdoor Unit mounting bracket should be fixed so that panning can take place in
the horizontal plane (i.e. pivots top and bottom). Check that line of sight with CT
antenna does not breach the deployment rules.
4. Note: Leave adequate clearance around the outdoor unit wall mounting assembly to
allow for the full adjustment range when aligning the antenna.
5. Locate the direction of the CT site using the survey information and decide if the
outdoor unit is to hinge from the left or right to allow panning in the directions of the
CT antenna. The same bracket is used for left or right hinge, Rotate the bracket to
give the required orientation.
Outdoor Unit Bracket Orientation