User's Manual

605-0000-595 Subscriber Terminal Installation and Commissioning

Installing Outdoor Unit

Installing the Wall Mount Outdoor Unit Using Bracket 605-

0010-279/280.

Use this procedure to install the Outdoor Unit. Before installing the Outdoor Unit check that

the proposed position meets the site selection guidelines.

Country Specific Requirements

USA: In the USA the Outdoor Unit shall be installed in accordance with articles 725, 800, 810

and 820 of the National Electrical Code

Canada: In Canada the Outdoor Unit shall be installed in accordance with section 54 of the

Canadian Electrical Code

The Wall Mounting Kit comprises:

Item Quantity Use

Wall mounting Bracket 1 Fixed to Building

Wall Mounting Arm for T6 cable 1 Fixed to Outdoor Unit

or Wall Mounting Arm for T11

low loss cable

1 Fixed to Outdoor Unit

M8 x 20mm Bolts 2

M8 Coiled Washer 2

M8 Plain Washer 2

Pivot connecting Arm and

Bracket

M8 x 50mm Coach Bolt 4

M8 Plain Washer 4

Fixing to wood

M6 Dyna Bolt 4 Fixing to brick/block

M6 x 16mm Bolts 4

M6 Coiled Washer 4

M6 Plain Washer 4

Mounting Outdoor Unit to

arm

Cable Tie 3 Securing IF Drop Cable

Outdoor Unit Positioning and Securing.

STEP PROCEDURE

1. Confirm the position of the outdoor unit ensuring that there is no obstruction in front

and to either side.