User's Manual

Installation
43
Unpacking and Inspection
Important: Check Configuration
Ensure correct software build and configuration: Check this before leaving ‘base’ as it may be
time consuming or not be possible to remedy this at the customer’s site.
2. Delivery Inspection
Upon taking delivery of the equipment consignment, check that the consignment agrees in all
particulars with the consignment delivery documentation (number of boxes, descriptions,
contents of boxes, etc.). Any discrepancy or damage must be reported immediately to Airspan
([phone] ) for further instructions. In case of severe damage, do not accept the
consignment from the carrier.
3. Unpacking Inspection
The contents of each box must be checked against the relevant part lists provided with the
box, for the correct part numbers and quantities, and for damage. Any shortage or damaged
items must be reported immediately to Airspan for further instructions at the address given
below :
Airspan Communications Limited
Cambridge House
Oxford Rd
Uxbridge
Middlesex
UB8 1UN
Int. Tel: [phone] Int. Fax: [phone]
Dispose of all unnecessary packaging in a safe manner according to the customer's
requirements.
Note: It is recommended that one package carton of each type be retained should it be
required to return any faulty or damaged items for repair.