User's Manual

605-0000-595 Subscriber Terminal Installation and Commissioning
28
The Outdoor Unit has two mounting options:
a) Pole Mount
b) Wall Mount
Pole Mounting
The antenna is normally pole mounted on a 38mm(1.5") Pole (provided by the service
provider). Adjustment of the antenna (in the azimuth plane) is achieved by rotating the
outdoor unit around the pole, the optimum positioning being determined by measuring the
strength of the incoming signal, usually in the direction of the CT antenna.
Wall Mounting Bracket
The outdoor unit mounting bracket fixes directly onto the wall of the building and provides
adjustment (in the azimuth plane) of the antenna in an arc over 150°, the optimum positioning
being determined by measuring the strength of the incoming signal, usually in the direction of
the CT antenna.
IF Drop Cable
The drop cable connects the internal SIU to the antenna via an environmentally protected F-
Type connector that is plugged into the backplate of the antenna. The drop cable come in
standard (RG6) or low loss (RG11). The IF drop cable is 50m(RG6) or 75m(RG11) with a
40mm maximum bend radius.
Power Supply Units
Two types of PSU are available. The Type 7 PSU for installations that require battery back-
up and the Type 6 PSU for installations that do not require battery back-up.
The, R, S, series SIUs use a Type 6 PSU