User's Manual

iRelay 460 Equipment Installation Guide
UGD-D01035
Airspan Commercial and Internal Use 17
3. Secure the unit to the bracket with the two bolts (supplied in the mounting kit). Fully secure by
tightening the screws with a spanner/wrench (13 mm).
Figure 13: Securing the iR460 Unit
Figure 14: iR460 Installed on a Large Pole
2.3.1.3.1 Torque Setting Large Poles
Torque setting for the steel bands used for mounting iR460 on a large pole should not exceed 3.7 lb ft
or 5 Nm.
For more information, see Appendix F, Torque Setting for Serratub Maxi Steel Bands.
2.3.1.4 Mounting Type B iR460 for Wood Poles Greater than 3.75 inch
Diameter (TBC)
2.3.1.5 Mounting the iR460 Panel Antenna Unit on a Wall
For wall mounting, perform the following steps:
1. Attach the mounting bracket to the wall using three fixings.