User's Manual

iRelay 460 Equipment Installation Guide
UGD-D01035
Airspan Commercial and Internal Use 8
Adhering to European Directive 1999/519/EC 1.5.2
European Council Recommendation1999/519/EC details basic restrictions and reference levels on
human exposure to electromagnetic fields as advised by the ICNIRP. Adherence to these
recommended restrictions and reference levels should provide a high level of protection as regards
the established health effects that may result from exposure to electromagnetic fields.
1.6 Verify Installation Requirements
Verify the Tools 1.6.1
Table 3 lists the tools required for the installation.
Table 3. iR460 Installation Tools
Tool Quantity Purpose
Flat blade screwdriver 1 For pole straps (large poles)
Wrenches for M8 and M10 hex
head screws
1
For securing iR460 to the bracket and bracket to small
poles
Large pliers 1 For tightening the cable glands
Knife 1 For stripping the back insulation
Wire cutters 1 For cutting and trimming the electrical wires
Wire strippers 1 For cutting the insulation
Ring terminals crimp tool 1
For fitting the ring terminals (for example, on the ends of
the earthing cables)
RJ45 Crimp tool 1
For crimping the RJ45 connectors to the CAT5e cable
terminating ends
Laptop PC 1 For commissioning of units and alignment of the PtP links
Optional
As
required
• Pen
• Labeling machine with weatherproof label
• Binoculars
Verify the Parts and Kits 1.6.2
Table 4 and Table 5 provide information on the entire set of installation parts and kits.
For information on the correct set of itinary for a use case (for example, an IB-POE-OD-0 is used for
an outdoor installation with an AC input), see the iRelay 460 Configuration Guide (Rev 1.0).
Table 4. iR460 Installation Parts and Kits
Product Part Code Item Description Quantity per
Install
iR460 unit
IR460-xxxx-xxx-xx iR460, single Ethernet, PoE input
1
POE+
POE supported from AirHarmony*