User's Manual
Table Of Contents
- Installation
- Overview AS4000
- Overview AS4020
- Preparation
- Rack Installation
- AS4000 AC Rack Cabling and Wiring
- AS4000 CT Shelf Cabling and Wiring
- _
- Expansion Rack Cabling
- Setup and Test
- System Testing
- AS4000 AC Setup and Test
- Access Concentrator: Turn-Up and DC measurements
- Setting Up the Access Concentrator
- _
- Setting the TEI and Baud Rate for Netspan Connection
- Creating AC Shelf/Rack on Sitespan
- Setting up AC Rack and Shelf configuration
- Configure AC Cards
- Configure AC Shelf properties
- Check Boot Sequence
- Alarm and Status Indications (Test 3)
- Self Test (Test 4)
- Test CTU cabling to the DDF E1 Cards
- Test CTU cabling to the Distribution Frame (DDF) GR303 Cards.
- Test XTU cabling to the DDF
- Connecting the AC to the Network
- Connect E1s/T1s to the Switch or Cross-Connect at the DDF
- Access Concentrator Rack Commissioning Test Results
- AS4000 CT Setup and Test
- AS4020 CT Setup and Test
- _
- General
- Repair and Return Procedure
- Repair Charges
- Return & Repair Tag
- Packing and Shipment
- Glossary
- Index
189
Index
A
AS4000 Racks ........................................1
C
Cable Trays.............................................4
Commissioning Access Concentrator Rack
..........................................................97
Commissioning Central Terminal Rack..97
Commissioning Process........................97
D
DC Power .............................................16
Delivery Inspection..................................4
F
Flooring...................................................4
I
Installing Rack in a Suite .......................13
M
Measuring Input Voltage......................113
Modification for Directional Antenna ......64
O
overhead Ironwork ................................13
P
Positioning and Securing Racks............13
PSU Voltage Combiner Shelves..........113
PSU Voltage DA Modem Shelves
R
Rack Earthing .......................................16
S
Securing Rack Base..............................13
Site Earth................................................4
Switching on the racks........................113
U
Unpacking Inspection..............................4