User Manual

AS4000 Central Terminal Installation and
Commissioning
DLP 008
605-0000-432
Issue 1.3a Date 18th October 1999
Page 1 of 4 Copyright Airspan Communications Corporation 1999
CONNECTION TO SITESPAN
1. Modem Connection to Sitespan
The figure below shows a typical set-up for connecting the CT site to a remote management
site. The CT rack connects to the Server PC via a Digiboard port expansion card in the PC.
Each modem shelf connects to a port using an RS232 cable. A modem connected to a serial
port access the POTS network. At the remote site the modem connects to the Sitespan Client
PC. Cable connections are shown
Remote Site
CT Site
ACC
Airspan
Server PC
Modem
Dialup
Link
Digiboard
(PC Card)
Modem
Client PC
Figure 22. Sitespan Modem Connections