User Manual

Central Terminal
Installation and Commissioning
DLP 001
605-0000-432
Issue 1.3a Date 18th October 1999
Page 1 of 4 © Copyright Airspan Communications Corporation 1999
PREPARATORY TASKS
1. Installation Tools and Equipment
The following lists of tools and equipment are required to successfully install and test
the AS4000 Central Terminal Racks.
1.1. Required Tools
• Combination Spanners: 8 mm, 13 mm, 17 mm, & 19 mm.
• Spirit Level: 18 inch.
• Pozidriv: No 1 x 75 mm.
• No 2 x 100 mm
• No 3 x 150 mm.
• Screwdriver, flat blade: 3 mm x 100 mm.
• Screwdriver, flat blade: 5.5 mm x 100 mm.
• Screwdriver, flat blade: 8 mm x 150 mm.
• Hammer, Ball Pein: 1lb.
• Drill Bits, Masonry: 11 mm, 12 mm, 13 mm.
• Ratchet Crimp Tool for red, blue and yellow insulated crimps.
• Crimp Tool type 6A with VQ dies for co-ax connectors.
• Cordless Drill/Driver.