User Manual

AS8100 Sitespan User Guide Version 3.7
605-0000-426
DLP 117
Draft Issue 6.0. Date 4/4/00
Page 277 of 305
Signalling Configuration (Sig Cfg): Select required configuration from the drop menu or
create a new one by clicking the configurations button and selecting ST Signalling (see
DLP115)
Service Type: Select the required Service Type from the drop menu or create a new one by
clicking the configurations button and selecting ST Service Type (see DLP115)
XTU Slot: E1 Number and Timeslot: Allocate each Subscriber line an XTU, E1 link and
timeslot to provide the backhaul to the switch. . Each subscriber line must have a unique
timeslot. If the timeslot has already been allocated the following screen is displayed.
Allocate another timeslot.
CTU CT Connections: Drop the menu and select the shelf in the Central Terminal that the
ST connects to on acquisition. If the connections are not set then the following message
appears when OK is clicked.
Software Download: Checking software download makes the ST available for software
download. Progress of the download can be monitored if desired by checking the monitor
progress box. On completion of the download the boxes should be reverted to clear.
Authenticate: Checking the code phase and Serial number boxes enables authentication of
the subscriber. Service is only provided to the subscriber if the Serial Number and Code
Phase are as set on installation of the ST
7. To change configuration click the configuration click the Configurations button.
SeeDLP115.
8. When all fields are complete click OK to add the subscriber to the ST List
9. To create a subscriber record associated with the ST go to DLP-120
STOP. THIS PROCEDURE HAS BEEN COMPLETED.